Product Summary
The PIC18F86J90-I/PT is a 80-Pin, High-Performance Microcontroller with LCD Driver and nanoWatt Technology.
Parametrics
PIC18F86J90-I/PT absolute maximum ratings: (1)Ambient temperature under bias: -40 to +100℃; (2)Storage temperature: -65 to +150℃; (3)Voltage on any digital only I/O pin or MCLR with respect to VSS (except VDD): -0.3V to 6.0V; (4)Voltage on any combined digital and analog pin with respect to VSS (except VDD and MCLR): -0.3V to (VDD + 0.3V); (5)Voltage on VDDCORE with respect to VSS: -0.3V to 2.75V; (6)Voltage on VDD with respect to VSS: -0.3V to 3.6V; (7)Total power dissipation: 1.0W; (8)Maximum current out of VSS pin: 300 mA; (9)Maximum current into VDD pin: 250 mA; (10)Maximum output current sunk by PORTA<7:6> and any PORTB and PORTC I/O pins: 25 mA; (11)Maximum output current sunk by any PORTD, PORTE and PORTJ I/O pins: 8 mA; (12)Maximum output current sunk by PORTA<5:0> and any PORTF, PORTG and PORTH I/O pins: 2 mA; (13)Maximum output current sourced by PORTA<7:6> and any PORTB and PORTC I/O pins: 25 mA; (14)Maximum output current sourced by any PORTD, PORTE and PORTJ I/O pins: 8 mA; (15)Maximum output current sourced by PORTA<5:0> and any PORTF, PORTG and PORTH I/O pins: 2 mA; (16)Maximum current sunk by all ports combined: 200 mA.
Features
PIC18F86J90-I/PT features: (1)Direct LCD Panel Drive Capability: Can drive LCD panel while in Sleep mode; (2)Up to 48 Segments and 192 Pixels, Software Selectable; (3)Programmable LCD Timing module: Multiple LCD timing sources available; Up to four commons: static, 1/2, 1/3 or 1/4 multiplex; Static, 1/2 or 1/3 bias configuration; (4)On-Chip LCD Boost Voltage Regulator for Contrast Control; (5)Charge Time Measurement Unit (CTMU) for Capacitive Touch Sensing; (6)ADC for Resistive Touch Sensing; (7)Two Crystal modes, 4-25 MHz; (8)Two External Clock modes, up to 48 MHz; (9)4x Phase Lock Loop (PLL); (10)Internal Oscillator Block with PLL: Eight user-selectable frequencies from 31.25 kHz to 8 MHz; (11)Secondary Oscillator using Timer1 at 32 kHz; (12)Fail-Safe Clock Monitor: Allows for safe shutdown if peripheral clock fails; (13)10,000 Erase/Write Cycle Flash Program Memory, Typical; (14)Flash Retention 20 Years, Minimum; (15)Self-Programmable under Software Control; (16)Word Write Capability for Flash Program Memory for Data EEPROM Emulators.
Diagrams
Image | Part No | Mfg | Description | Pricing (USD) |
Quantity | |||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
PIC18F86J90-I/PT |
Microchip Technology |
8-bit Microcontrollers (MCU) Segmnt LCD 96KBFlash 4KBRAM 12MIPS |
Data Sheet |
|
|
|||||||||||||
Image | Part No | Mfg | Description | Pricing (USD) |
Quantity | |||||||||||||
PIC1018SCL |
Other |
Data Sheet |
Negotiable |
|
||||||||||||||
PIC10F200 |
Other |
Data Sheet |
Negotiable |
|
||||||||||||||
PIC10F200-E/MC |
Microchip Technology |
8-bit Microcontrollers (MCU) 384B Flash16B RAM 4 I/O |
Data Sheet |
|
|
|||||||||||||
PIC10F200-E/OT |
Other |
Data Sheet |
Negotiable |
|
||||||||||||||
PIC10F200-E/P |
Microchip Technology |
8-bit Microcontrollers (MCU) U 579-PIC10F200-I/P |
Data Sheet |
Negotiable |
|
|||||||||||||
PIC10F200-I/MC |
Microchip Technology |
8-bit Microcontrollers (MCU) 0.375KB Fl 16B RAM |
Data Sheet |
|
|