PIC16LF88-I/SS

Product Summary

The PIC16LF88-I/SS is a 20-Pin Enhanced Flash Microcontroller with nanoWatt Technology.

Parametrics

PIC16LF88-I/SS absolute maximum ratings: (1)Ambient temperature under bias: -40 to +125℃; (2)Storage temperature: -65 to +150℃; (3)Voltage on any pin with respect to VSS (except VDD and MCLR): -0.3V to (VDD + 0.3V); (4)Voltage on VDD with respect to VSS: -0.3 to +7.5V; (5)Voltage on MCLR with respect to VSS: -0.3 to +14V; (6)Total power dissipation: 1W; (7)Maximum current out of VSS pin: 200 mA; (8)Maximum current into VDD pin: 200 mA; (9)Input clamp current, IIK (VI < 0 or VI > VDD): ±20 mA; (10)Output clamp current, IOK (VO < 0 or VO > VDD): ±20 mA; (11)Maximum output current sunk by any I/O pin: 25 mA; (12)Maximum output current sourced by any I/O pin: 25 mA; (13)Maximum current sunk by PORTA: 100 mA; (14)Maximum current sourced by PORTA: 100 mA; (15)Maximum current sunk by PORTB: 100 mA; (16)Maximum current sourced by PORTB: 100 mA.

Features

PIC16LF88-I/SS features: (1)Primary Run: RC oscillator, 76 μA, 1 MHz, 2V; (2)RC_RUN: 7 μA, 31.25 kHz, 2V; (3)SEC_RUN: 9 μA, 32 kHz, 2V; (4)Sleep: 0.1 μA, 2V; (5)Timer1 Oscillator: 1.8 μA, 32 kHz, 2V; (6)Watchdog Timer: 2.2 μA, 2V; (7)Two-Speed Oscillator Start-up; (8)Three Crystal modes: LP, XT, HS: up to 20 MHz; (9)Two External RC modes; (10)One External Clock mode: ECIO: up to 20 MHz; (11)Internal oscillator block: 8 user selectable frequencies: 31 kHz, 125 kHz, 250 kHz, 500 kHz, 1 MHz, 2 MHz, 4MHz, 8MHz; (12)100,000 erase/write cycles Enhanced Flash program memory typical; (13)1,000,000 typical erase/write cycles EEPROM data memory typical; (14)EEPROM Data Retention: > 40 years; (15)In-Circuit Serial Programming (ICSP) via two pins; (16)Processor read/write access to program memory; (17)Low-Voltage Programming; (18)In-Circuit Debugging via two pins; (19)Extended Watchdog Timer (WDT): Programmable period from 1 ms to 268s; (20)Wide operating voltage range: 2.0V to 5.5V.

Diagrams